Last price update was: October 23, 2024 11:30 pm
× Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.

TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting…

(13 customer reviews)
Product is rated as #31 in category Gopro Camera Mount Adapter
7

Original price was: $15.99.Current price is: $14.99.

Best deal at: amazon.comAmazon.com
Buy for best price
Last updated on October 23, 2024 11:30 pm
TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting…
TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting…

Original price was: $15.99.Current price is: $14.99.

TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting… Prices

$14.99 $15.99
October 23, 2024 11:30 pm
× Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
1 new from $14.99
1 used from $13.85

Price History

-

Description

TELESIN Replacement Adapter (*8*) with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting…. From the model TELESIN.

  • Progressive designed Dual Interface Replacement Adapter Base for GoPro Max, Hero 10, Hero 9 Black and Hero 8 Black motion digicam.(*10*)
  • Product of Aluminum Alloy materials, sturdy supporting, steady and protected.(*10*)

  • With 1/4 common screw gap makes it attainable to mount each the digicam and selfie stick or tripod equipment, extra prolong capabilities.(*10*)

  • Simple substitute and set up, no additional instruments required.(*10*)

  • Package deal content material contains 1 x Dual Interface Adapter Base, 1 x Screwdriver, 6 x Screws. Full set of set up instruments and substitute screws.(*10*)(*9*)

    TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting Go Pro and Selfie Stick Tripod Accessories
    TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting Go Pro and...
    $15.99
    $14.99
    Amazon.com
    Amazon price updated: October 23, 2024 11:30 pm

Additional information

Specification: TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting…

Package Dimensions

6 x 1.8 x 0.7 inches

Item Weight

1.58 ounces

Date First Available

September 19, 2020

Manufacturer

TELESIN

TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting… Videos

World News

Reviews (13)

13 reviews for TELESIN Replacement Adapter Mount with 1/4 Tripod Connector Port for GoPro Max Hero 10 Hero 9 Hero 8 Black, Dual Interface for Straightly Mounting…

3.2 out of 5
4
1
4
2
2
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Carlos J. Livingston

    Fantastic upgrade. This should be stock feature in all GoPro cameras. Another clear engineering oversight that clearly proof GoPro absolutely doesn’t care about what their customers need from their products.
    The two magnetic inserts on each leg are not neodymium like in the original. That would be an improvement for future versions of this product. However they do there job to keep the legs retracted anyways.

    Helpful(0) Unhelpful(0)You have already voted this
  2. exile

    look like loose and not as sturdy as genuine part. Smart breakthrough in usability because it supports tripod mount (I chose because I liked idea)

    Helpful(0) Unhelpful(0)You have already voted this
  3. massimo fusco

    Il prodotto è realizzato molto bene ma con un problema se si usa insieme alla Gopro Hero 8 il modulo aggiuntivo microfono il suddetto impedisce alle allette di ancoraggio di uscire.

    Helpful(0) Unhelpful(0)You have already voted this
  4. JuanKiDíaz

    I initially installed the adapter mount without any issues, using all its own hardware.

    The first time I went to use it attached to the Insta360 Selfie Stick, the whole thing came off, then I noticed that although I had felt everything screwing tightly and correctly, some of the screws were loose and couldn’ t be properly tightened.

    After some online research I ordered some “MroMax M2 x 4mm Machine Screws” and they did the trick and now the mount is completely tightened the way it should be.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Dan

    Fancy box and screwdriver does not compensate for the complete and utter rubbish mount.
    Although made of metal, it has two huge issues:
    1. It is very wobbly
    2. The two “fingers” don’t sit at the proper angle when open. One goes too much, the other too little. As a result, it looks like this: _\\_ (exaggerated, but they don’t sit perpendicularly, so the camera will be tilted. I don’t know if all of them are like this or just mine has a fabrication defect, but I am haply I haven’t ordered two, as I initially wanted to.
    Definitely not worth it. I’ll keep using the GoPro factory mount.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Jonathan Austerberry

    Got this thinking being able to screw on my other .25 camera gear would be great, while retaining the gopro connector. The go pro connector is so loose it shakes the camera when in use. Would not buy again.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Chet

    Coolest update for the leggy models. Can use any 1/4×20 tripod or selfie stick. Easy on the wallet too!

    Helpful(0) Unhelpful(0)You have already voted this
  8. SteveK

    The good…
    The part seems of good quality.
    The inclusion of 4 replacement grub screws.
    The inclusion of a specialised screwdriver to remove and replace grub screws.
    The BAD!
    The inclusion of a very poor-quality-metal specialised screwdriver. The metal is so soft that after removing 3 screws the 4th was a little stiffer _ it destroyed the tip of the screwdriverand damaged the screw.
    Where does this leave me? With 3 screws removed not able to be replaced … one screw unable to be removed and a gopro unable to be used on any tripod or stick.
    Gee..thanks a bunch… grrr.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Amazon Customer

    looks just as good at least as the OEM part on the camera.
    haven’t used as it was bought as a spare.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Chris

    Overall, this is exactly what I needed/was expecting, but there are some issues with the design of it.

    Pros: It adds the threading for a normal tripod mount.

    Cons: Its not “thick” enough, so you need to add some washers/spacers to the threading on your tripod. (not a big deal, but be aware)
    the magnets on the gopro mount feet aren’t as strong as the originals, and the gopro mount feet are loose which bothers me.

    Helpful(0) Unhelpful(0)You have already voted this
  11. Ray

    The magnetics are not as strong as the OEM. One of the fingers rubs on my Media Mod AND the same finger is super loo. Doesn’t bring protection pads compared to the OEM Folding Finger.

    Helpful(0) Unhelpful(0)You have already voted this
  12. Jake

    Wanted to attach on tripod – works great, very well made – comes with tool and spare screws

    Helpful(0) Unhelpful(0)You have already voted this
  13. Danny Garon

    Works I guess, but it’s a bit crooked so the tolerances with the manufacturing are just off it seems. Still better than the original one that got smashed in my last crash, but still… would have been nice to have my gopro sit up at 90 degrees instead of at 85 degrees 🙂

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    LensGearPro
    Logo