NEEWER Motorized Camera Slider, 39.4″/100cm Carbon Fiber Dolly Rail Slider with Remote Control, Support Video Mode, Time Lapse Photography,…

 How did you get that shot?!?
That was the first question i got once i posted the Time-lapse i took with this

It doesn’t just work with a DSLR/Mirrorless, i used it with my GoPro as well.

Super simple to use and worked flawlessly.

I’m so glad i was able to add this to my kit!

Bottom line is, this is a good motorized slider for the price (if you can get it for under $275). Runs a Blackmagic 6K Pro with 16-35/2.8 lens nice and steady. There are a couple of important items to note, so please read this if you are initially frustrated:

1. you HAVE to select Gradient: Y if you want it to stop/start smoothly on each pass. I have no idea why this isn’t the default, but I bet a lot of people are returning this because they can’t figure out how to make it operate smoothly. Its buried in the instructions somewhere, but who reads those anymore?

2. The controller box is maxed out at a speed that is just too slow for most us. The movement is barely noticeable on camera. Obviously, need to speed that up right? Well Neewer product people apparently were getting too many complaints that the motor was too loud at the required speeds, so they stopped it via firmware from going fast enough. I got this info from the super nice and helpful Neewer customer service rep based somewhere in NJ who called me after I posted my frustrations in the questions section. However, a different Neewer rep based offshore somewhere emailed me a day later and sent me a firmware update that resolved the issue (though it did take another round of emails before I got instructions on how to install the update onto the controller). So, I know that a workaround DOES exist, but boy did it take massive effort, multiple back and forth with Neewer, and yes the result is that it’s somewhat of a loud slider when going at optimal speed – but honestly most other brands I’ve used are just as loud or even louder. It’s really nothing that can’t be fixed in post, just do your best to place it away from your mics, and also record a few seconds of room tone with slider running so you can build a noise gate in post.

3. The rubber belts it ships with don’t seem very rugged. Be absolutely sure you don’t let anything get in the way of the slider while it’s traveling back and forth. If these belts get jammed and stretch out, it may be hard to get smooth movement again.

I’ve been looking for a slider for years and was concerned as there always seemed to be a negative review or two for each model. This is a real review – I bought the product to improve the content for my YouTube channel. LIke most people, I’d rather not waste money on useless junk.

Things I wish I knew – the slider comes with a ball head for mounting your camera. Set up was a snap – just connect the loose side of the belt and charge the battery and you’re all set. Get a spare mount plate for your tripod. i’m using the slider on a Manfrotto 501 (so a large, sturdy tripod for heavy video equipment) – rock solid – zero issues.

The slider is silky smooth and is made from quality materials – surprising at this price point. Carbon fibre rods and aluminum parts for the rest. Nicely anodized for wear resistance. Pull the belt mount tight – it’s a standard sized GT2 belt and unlikely to cause issues (easily replaced if damaged).

Things I think could use improvement – the interface. The controller connects via an RJ45 cable (shielded) – which is fine…I don’t always want to be fiddling with multiple devices on my phone. The trick is to set up your shot BEFORE you connect the controller and page through the menus. The problem with the interface is there is no “BACK” command – once you’ve selected the operating mode (video or time lapse photography) you’re locked in…no going back. No playing with various modes. Once you’re in video, you’re locked in and have to restart the controller (ON/OFF) – then it has to search for the start and finish points on the track. I did find this frustrating. Set your shot without the controller connected – then connect and you’re set.

This slider can also do panorama or single focus point shooting (it rotates the camera during motion) – easy to understand and set. I did want this feature and it works great.

I’m impressed with the packaging – lovely case to hold the equipment and overall it works flawlessly, is smooth, makes no noise and I wish I’d invested in one years ago. I’m fine with the quirks of the controller. After using it for a week – I know exactly what I want to get the shot I’m after and it doesn’t bother me.

i gave it 5 stars as I was impressed with the value for money and how sturdy this slider is overall. It was much better than I expected at this price point.

I was excited to set this up and test. Seemed well built (for the price) and it connected first time – all worked well until I played back the video.

Unstable. Jittery. Not massive. But noticeable. This was with an iPhone 11Pro (which has good stabilisation).

I found out from customer support that this was to be expected with anything below an iPhone 12, but iPhone wasn’t my main use for the slider.

I then used the with a Sony A7iii and the results were great. Smooth, stable footage. No jitters.

Setting up the camera sweep and angles was a bit hit and miss, but that is to be expected on a cheap consumer product vs paying more for something with more refined control.

A good investment.

I love the slider with the exception of the remote. The slider is a solid build material and with stands on one side and your tripod in middle you are stable with for stable video. It’s quiet and variable speed for different movements in video.

**Update** Was able to upgrade to the wireless slider and it is much better option. Not being limited to the length of a cable on shoots is a must. For the money it’s definitely a solid buy.

This is my second motorised slider purchased (the first wasn’t the same brand) and what a leap forward this has been for me in terms of quality which was clear from the very moment I opened the packet. The biggest bonus for me with this model is not having to dismantle anything to return it to its case.With the motor mounted inside, I can just take it out of its carry case and its good to go.I paid a little more than last timeout it was worth it.The assembly is good, the finish is nicely done and it works as smoothly as it should.Happy.