Last price update was: November 1, 2024 1:54 pm
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
Camera Car Windshield Suction Cup Mount for GoPro, EXSHOW 360 Rotation Heavy Duty Car Window Holder with 1/4-20 Thread for GoPro Hero 9 8 7 6 5 4…
Product is rated as #31 in category Gopro Camera Holder
- All prices mentioned above are in United States dollar.
- This product is available at Amazon.com.
- At amazon.com you can purchase Dashboard Pad Mounting Disk for Suction Cup, 95mm (3.74") 3M Heat Resistant Adhesive Disc for Dash Camera Windshield Holder, GPS, Tablet, Car Phone Bracket Base with Sticky Adhesion Replacement 3 Pack for only $9.99
- The lowest price of Dashboard Pad Mounting Disk for Suction Cup, 95mm (3.74") 3M Heat Resistant Adhesive Disc for Dash Camera Windshield Holder, GPS, Tablet, Car Phone Bracket Base with Sticky Adhesion Replacement 3 Pack was obtained on November 1, 2024 1:54 pm.
Camera Car Windshield Suction Cup Mount for GoPro, EXSHOW 360 Rotation Heavy Duty Car Window Holder with 1/4-20 Thread for GoPro Hero 9 8 7 6 5 4…
Original price was: $11.99.$9.99Current price is: $9.99.
Camera Car Windshield Suction Cup Mount for GoPro, EXSHOW 360 Rotation Heavy Duty Car Window Holder with 1/4-20 Thread for GoPro Hero 9 8 7 6 5 4… Prices
$9.99
$11.99
November 1, 2024 1:54 pm
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
1 new
from $9.99
Price History
-
Description
(*6*) Car Windshield Suction Cup (*9*) for GoPro, EXSHOW 360 Rotation Heavy Duty Car (*7*) (*5*) with 1/4-20 Thread for GoPro Hero 9 8 7 6 5 4…. From the model EXSHOW.
- ????【Good Compatibility】— Swimsuit for any (*6*)s Recorder Camcorder with 1/4-20 mounting sample reminiscent of GoPro Hero 9 Max 8 7 6 Black 5 4 3+ 3 2 1, SJCAM SJ7000 SJ6000 SJ5000 SJ4000, AKASO EK7000, Canon g7x Vlogging, Sony, DSLR, Garmin Tom Tom, Nikon, Campark, Crosstour, Dragon Contact, APEMAN, COOAU, Neewer, Victure, VanTop and so forth.
- ????【WIDE MOTION】— The primary adjustable arm strikes at an unimpeded 360 diploma and it comes with an adaptor that may transfer the digicam in number of angles, extra versatile than different gopro suction cup mounts. the adjustable joints and arms of our suction cup mount lets you lock your go professional digicam at the very best visible angle and seize your greatest photographs.
- ????【Multifunction (*9*)】— It will be straightforward to stay on automobile windshield windscreens, glassware, window, automobile dashboard, automobile bonnet and any clean floor.
- ????【Excessive High quality Uncooked Materials + Suction Cup】— We use Uncooked ABS+PC and steel ball joint with a purpose to be extra sturdy whereas outside strenuous exercising. industrial robust 9cm suction cup made by TWO LAYER TPU materials: Guarantee it may be stick strongly on windshield from -13 diploma Fahrenheit to 194 diploma Fahrenheit (cup 90mm 3.55in).
- ????【High quality after-sales】— Our product high quality has the identical high quality and design because the official GoPro suction cup mount, all our merchandise comes with a 1 12 months guarantee alternative or refund, we might reply your any questions in 18 hours.
(*8*)
Additional information
Specification: Camera Car Windshield Suction Cup Mount for GoPro, EXSHOW 360 Rotation Heavy Duty Car Window Holder with 1/4-20 Thread for GoPro Hero 9 8 7 6 5 4…
|
World News
Reviews (13)
13 reviews for Camera Car Windshield Suction Cup Mount for GoPro, EXSHOW 360 Rotation Heavy Duty Car Window Holder with 1/4-20 Thread for GoPro Hero 9 8 7 6 5 4…
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
You must be logged in to post a review.
Howard –
Has never came off accidentally since I installed on my windshield a month ago. Easy to adjust. I would have given 5 stars if the materials were better. Seems made of cheap plastic that would become brittle and would not last very long. Time will tell.
For the price, it’s a good product.
Whose That Guy –
I have a Fitfork 4K Action camera that came with every mount you could think of. . . with the exception of a windshield mount. I ordered this not knowing what to expect since it was a brand and company I had never heard of, but I figured it is easy enough to return to Amazon if the quality is not up to par. Well, no worried about that. This item is really nice, and fits my Fitfork like a glove. The suction are is huge. . . once it goes on, you don’t need to worry about it every coming off. I can now use my action camera as a dash cam, which was the main reason for the purchase. Very happy, would buy again.
Jonny –
*2021 Update* 1-Star
Do not move the camera or let the camera be moved once you clamp and tighten everything down. The part of the mount the camera mounts to is a round ball inside a cage basically. The cage has ridges which are supposed to grip onto the ball, but they got worn down super quick. Now even when i tighten everything all the way, the camera will still swivel and move around with small G forces acting on it, and bigger G forces will totally get the camera off shot.
So originally I saw this and thought it would be great. It does work with standard cameras and brings an adapter for go pro’s, so compatibility is not too much of an issue. When I received it it was a lot smaller than I was expecting, so make sure you double-check those dimensions! Due to this, you don’t have as much flexibility in order to get a good shot. If it was just a couple of inches longer that would be nice. The main reason I wanted a mount such as this was to use it outside. The first time using it outside the mount and camera fell off after several minutes. Lucky for me I thought about this and had my camera clipped to the inside of the car. I mounted it again on the outside and drove for about 5 minutes with no issue. Over it feels nice and about average build quality, I don’t expect it to last very long.
NomadCC –
I love this suction cup mount with the swivel mount. The quality and design are very good. The suction cup held firmly as I drove for miles and miles around Yosemite, I had one the exterior and one on the interior of the vehicle (on the glass) and never did it fall off or get loose. The swivel mount is also sturdy and holds the camera in place without any problems. Whats best about the swivel is that is very quick and easy to position it unlike the go pro that has multiple attachments that you have to swap out to get the angle that you want. Save yourself a headache purchase this over the Go Pro version.
Apsco Radiales –
Like I said, the ball is too small to the point where the clip cannot be tightened enough around it to prevent the camera from moving around or simply flopping off.
I had to wrap the ball in rubber tape to make it larger.
Also, I have a larger camera which is not ideal for this mount.
I have to mount the camera upside down in order for it not to hit the windscreen.
The second bolt on piece really needs to be longer for the mount to accept larger cameras.
Live and learn, I suppose.
CK –
Just installed. But so far, I am impressed by how truly sturdy this item feels. I was honestly expecting a cheap, wobbly plastic camera mount. Feels heavy duty.
We’ll see how well the suction works on this thing after it’s gone thru a couple of hot and cold cycles in my car in Southeastern US weather. If it fails, I’ll be back with an update! Otherwise, this seems to have been a very worthwhile purchase.
(By the way, a little trick I learned to enhance the suction power of any suction cup: Take a wet finger and moisten the cup rim/ring slightly just before attaching. The moisture helps seal the bond a little better. Not sure why this works but I wish someone would have told me this sooner!)
Rachel & Jay –
The media could not be loaded.
Nov 30 2020 – Seems quality. Sticks well to glass. Doesn’t stick well to the curved back surface of an iMac computer. Holding the weight of a phone sized battery powered light ok. Ball joint seems very strong and good. Perhaps improved since earlier models? See my attached video.
Dec 18th update. Still holding firm to glass. Has not budged since Nov 30th. Regularly holds 174grams of weight which is attached and removed frequently.
Feb 16th update. I’m impressed. Hasn’t budged since Nov. Fully recommend.
D.KOZICZ –
After months of searching for a durable well built mount for my note 8 I have found the answer! I didn’t want to pay for an action camera so I came across this mount that works with monopod adapters. When I say sturdy it doesn’t do this mount justice, I’ve had it attached to my windshield AND moonroof for actions videos in my BMW 750li and that sucker hasn’t moved or been removed by the excessive Las Vegas heat. And it comes with a gopro mount so you can use it for that as well.
THXkid –
Update: Problem with crushed box was solved BY manufacturer, so they get a 5 star from me for great customer service alone.
1st let me say I took off 1 star cause the packaging box came crushed, why even deliver a crushed box. This dash/windshield suction cup mount really adheres if you attach it to clean/flat surfaces. The product seems well made, will see how all the plastic withstands the 110+ degree heat in Arizona over time. you can lock it down and it will not move, great for those Time Warp shots you want to get.
Elefant93 –
Nutze die Halterung an der Windschutzscheibe für eine Mini-Kamera. Bei modernen Fahrzeugen mit heute üblicher flacher Windschutzscheibe muss die Halterung die Kamera nach unten schwenken damit die Halterung nicht permanent mit im Bild ist. Damit ist die Zugängigkeit zu den Bedienelementen stark erschwert. Dabei fällt dann auf, dass die Verschraubung für das Kamera-Gewinde nicht stabil genug ist, da es sich bei jeder Bedienung verstellt und wieder eingerichtet werden muss.
Anders sieht es bei meinem Oldtimer mit steilerer Scheibe aus. Hier ist die Halterung unterhalb der Kamera ohne ins Bild zu kommen. Damit sind die Bedienelemente oben und vorn an der Kamera besser erreichbar und alles ist gut.
Deshalb nur ein Stern weniger.
M. Jackson –
The mount itself works great, very adjustable and screws right into a camera. If you’re using a phone to make a video, you need to by a separate phone attachment. Also, more than likely, your car dashboard won’t b smooth enough for the suction to work, so you’ll need to by a separate round piece that sticks to your dashboard and then the camera mount will suction to that. I saw how all this might work on a YouTube video, which is the only reason I knew what I should buy to go with the mount, but it all worked out great. Also, I can just remove the mount and it fits in my glove compartment when I don’t need to use it.
Amazon Customer –
I was trying to use the EXSHOW Suction Cup Camera Mount for a security camera that was to be placed high up, on the inside of an office window.. This mount was listed as “heavy duty”, so I thought it would provide a more secure connection than a cheaper mount might. Everything seemed to go well at first, as the camera screwed into the threaded head just fine and the suction cup held the mount and camera securely to the inside surface of the window. Unfortunately it didn’t last too long… about 1 hour later the suction mount let go of the glass and the camera came crashing down to the floor. I thought that maybe I hadn’t cleaned the glass sufficiently the first time, so I gave it another thorough cleaning and tried it again, but it fell off a second time. This mount itself seems robust and maybe suitable for holding a GoPro just fine, but after seeing my security camera in pieces on the floor I’m not sure that I would trust it to hold any of my more expensive cameras.
Shawn C. –
The most sturdy suction cup mount that will last years even with abuse.
Effortly holds small cameras, action cameras, cell phones or anything else with the screw mount. Although, it will hold a DSLR but strongly not recommended as it seems to put lots of stress on the suction cup. just dont.. for cameras like a dslr get the gecko 3 suction cup mount.. it was designed for that in mind, not this one. Great for everything else