Last price update was: October 13, 2024 4:26 am
× Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.

Anwenk Camera Hot Shoe Mount Adapter Compatible with GoPro Adapter Gopro Hero 7 6 5 4 Attaching on Gopro DSLR Camera or Ring Light Photography

(13 customer reviews)
Product is rated as #5 in category Gopro Camera Mount Adapter
10

$7.99

Best deal at: amazon.comAmazon.com
Buy for best price
  • All prices mentioned above are in United States dollar.
  • This product is available at Amazon.com.
  • At amazon.com you can purchase Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4" Metal Tripod Thread for Flash Speedlight Speedlite, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax 4 Pack for only $7.99
  • The lowest price of Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4" Metal Tripod Thread for Flash Speedlight Speedlite, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax 4 Pack was obtained on October 13, 2024 4:26 am.
Last updated on October 13, 2024 4:26 am
Anwenk Camera Hot Shoe Mount Adapter Compatible with GoPro Adapter Gopro Hero 7 6 5 4 Attaching on Gopro DSLR Camera or Ring Light Photography
Anwenk Camera Hot Shoe Mount Adapter Compatible with GoPro Adapter Gopro Hero 7 6 5 4 Attaching on Gopro DSLR Camera or Ring Light Photography

Anwenk Camera Hot Shoe Mount Adapter Compatible with GoPro Adapter Gopro Hero 7 6 5 4 Attaching on Gopro DSLR Camera or Ring Light Photography Prices

$7.99
October 13, 2024 4:26 am
× Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
1 new from $7.99

Price History

-

Description

(*5*) (*6*) Hot Shoe Mount (*4*) Compatible with GoPro (*4*) (*7*) Hero 7 6 5 4 Attaching on (*7*) DSLR (*6*) or Ring Light Photography. From the model (*5*).

  • Comes with a Hot Shoe Mount, an (*4*) suitable with (*7*), can set up GoPro Hero digital camera on your DSLR or ring gentle. Word: this (*4*) suitable with gopro Is Appropriate for Underwater Use,Whereas Metallic Hot Shoe Is Not Appropriate for Underwater Use.
  • This sizzling shoe mount package is used for taking picture with digital camera and capturing video with GoPro Hero motion digital camera concurrently.
  • Hot Shoe Mount – Worldwide Normal with 1/4″-20 tripod screw adapter to mount your microphone, LED gentle, monitor to DSLR, camcorder or digital digital camera, or adapt anything that has a 1/4-20 receptacle.
  • Mount (*4*) Compatible with (*7*)- With 1/4”-20 screw on backside to permit to put in on a tripod/ monopod. It may be rotated and titled to desired angles.
  • Simple to make use of.

Additional information

Specification: Anwenk Camera Hot Shoe Mount Adapter Compatible with GoPro Adapter Gopro Hero 7 6 5 4 Attaching on Gopro DSLR Camera or Ring Light Photography

Package Dimensions

5.43 x 3.46 x 1.34 inches

Item Weight

1.44 ounces

Item model number

GoPro Mount Hot Shoe

Is Discontinued By Manufacturer

No

Date First Available

November 1, 2018

Manufacturer

Anwenk

Anwenk Camera Hot Shoe Mount Adapter Compatible with GoPro Adapter Gopro Hero 7 6 5 4 Attaching on Gopro DSLR Camera or Ring Light Photography Videos

Reviews (13)

13 reviews for Anwenk Camera Hot Shoe Mount Adapter Compatible with GoPro Adapter Gopro Hero 7 6 5 4 Attaching on Gopro DSLR Camera or Ring Light Photography

2.9 out of 5
5
0
2
0
6
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Jaws619

    After 18yrs of solid service, a few of my original Nikon SB-800 stands needed to be replaced. I say that proudly and yes, I still use SB-800’s, I see no reason to switch up my speed lights. Used and abused, but still reliable and right up there in power. Anyways, I gave these aftermarket stands a try and on the first shoot one of the speed lights fell and the stand broke. Simple as that, true story. Took me by surprise. The plastic used for these stands is very hard and stiff. The original Nikon stands were made of a strong plastic that had a slight flex to it, almost as if they knew ahead of time that speed lights fall from time to time. FYI, it broke at the hot shoe. Although, not an expensive pack of stands, I think I might try sourcing some original oem stands stands next. Thanks

    Helpful(0) Unhelpful(0)You have already voted this
  2. Nick Robinson

    I rarely leave reviews, but these things are great. The price is very low and the quality is there or thereabouts with the Nikon original. And, as I say, they have little rubber suction feet to stop them skidding around on smooth surfaces. The Nikon ones don’t. Very happy.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Osiris

    Sturdy, good quality product. I researched for about 2 days on which of these mounts to get and I’m happy I chose this one. I needed something that looked simple yet profesional and I’m happy with my purchase. Given with how simple the product is it gives you a good amount of options on how to stand your phone up. You can either do it landscape or portrait.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Speaker12

    The two plastic lips where you slot the flash in are very brittle. The first stand I tried lasted a few minutes, the second one a few seconds. The remaining two will be going in the bin as it is not worth risking an expensive flashgun dropping to the floor. If you want a flash stand look at one that’s better designed than these!

    Helpful(0) Unhelpful(0)You have already voted this
  5. Micheal

    You are probably wondering how can a simple thing like this be poor quality. I was wondering the same thing. The peace will not screw onto the screw because the hole is lopsided, so because of that it will not screw on like the others did. So I paid for two but really only have one because I am throwing the other one that is garbage away luckily I only really need it one and the other one was a backup which is now in the trash.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Goblynn93

    Junk.
    Horrible.
    Product does NOT match the photo (see photo). The knurling is almost completely smooth and offers no grip at all. The product shots show really nice grooves cut for the knurling but mine came with a crosshatch that is pathetic. Do not waste your money.

    I plan to return this item.

    Helpful(0) Unhelpful(0)You have already voted this
  7. angel montalvo

    I lost my original 600EX-II RT flash stand stands and wanted some replacements. Ordered product threw it in the photography bad and pulled them out while shooting a wedding. Put the flash on this product and instantly breaks so i though it might be because it’s a factory variant or maybe i got a bad one so i switch to the second one provided. While I’m moving the flash bam it dropped to the ground and it’s because the second one broke also !!!!!!!!! In the middle of the wedding not to mention that it also broke my flash head diffuser on the fall so DO NOT BUY THIS !!!!! If you’re a professional Photographer.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Mary F.C.

    Initially I was going to give this item 5 stars because when I compared it to a previous hot shoe mount, it appeared to be made of a stronger plastic. However, at a recent shoot my second shooter informed me that the flash fell. I assumed that maybe I had not tightened it. But yesterday I had a second flash fall. Upon careful examination I realized that the flash does not lock in place no matter how tightly I turn the dial to the lock position. I can literally pull it right off. I am disappointed as I was hopeful this would serve my needs, but I will not trust my speed lights on these mounts.

    Helpful(0) Unhelpful(0)You have already voted this
  9. P

    The sppedlight flash stands by Anwenk are really flimsy, just strong enough to hold a small speedlight on a flat surface but there is no way I’d trust one to securely hold one on top of a stand. Ok value, but not great.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Snowman

    Ordered these late on bank holiday Monday and they arrived next day by 3pm, good product for using with Rf603 mk 2 speed lite remote wireless. Only reason 4 stars for sturdiness is I have not used before.

    Helpful(0) Unhelpful(0)You have already voted this
  11. Happy Customer

    These are great for sliding into T slot 4040 extrusions to mount your flashes, dslr, etc to a common rail. The flat bolt fits into the T slot with a little slop and you can run down the bottom nut to your extrusion to lock the extrusion. The second thumb screw can then be tightened to your photo device to lock it to your rail. If you order the T slot 4040 you may want to see if they have a lighter duty 4040 if you are mounting it to a tripod. If you are using this to build a photo booth out of 4040 extrusion the standard extrusion would work amazing for mounting flashes and accessories. It does have a little slop in the slot but for a cheap option it works amazing.

    Helpful(0) Unhelpful(0)You have already voted this
  12. JACOB E PREEDIN

    Literally every single one of these broke when I tried to lock my Canon 600EXRTs to them. I tried different units to see if that was the issue but they all broke. Some even immediately before I could get the flash unit locked completely.

    Helpful(0) Unhelpful(0)You have already voted this
  13. Roger Whiteway

    These small plastic items do the job they are created for. They act as a stand if you want to stand your flashgun on a desk, and they include a metal thread underneath so that you can mount the flashgun onto a stand or tripod. Really useful.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    LensGearPro
    Logo