John Holguin
If you have a Piper home security camera and need to change your Wi-Fi connection, this guide is for you. Piper cameras offer reliable surveillance and peace of mind, but it’s essential to keep your camera connected to the internet for full functionality. Whether you’ve moved to a new house, changed your internet service provider, or simply need to update your Wi-Fi network, this step-by-step guide will assist you.
Step 1: Prepare Your Camera
The first step in changing the Wi-Fi on your Piper home security camera is to ensure that your camera is in the right state. Start by placing the camera near the Wi-Fi router and connecting it to a power source. Ensure that the LED light on the camera is blinking blue. If the light is red, press the reset button on the back of the camera to reset it to its default settings.
Step 2: Access Piper App
Next, you’ll need to access the Piper app on your smartphone or tablet. Make sure your device is connected to the Wi-Fi network that you want to connect your camera to. Open the Piper app and select your camera from the list of devices. If your camera is not listed, make sure it is powered on and connected to the same Wi-Fi network as your device. If you still can’t find your camera, try resetting it again.
Step 3: Change Wi-Fi Settings
In the Piper app, navigate to the Settings menu for your camera. Look for the Wi-Fi settings option and select it. You will be prompted to enter your Wi-Fi network name (SSID) and password. Make sure you enter the correct information and double-check for any typos. Once you’ve entered the correct details, tap the “Save” or “Connect” button.
Step 4: Connect to New Wi-Fi
After saving the new Wi-Fi settings, your camera will attempt to connect to the new network. The LED light on the camera will blink green during this process. It may take a few moments for the camera to establish a connection. Once the LED light turns solid green, your Piper camera is successfully connected to the new Wi-Fi network.
Remember, maintaining a reliable Wi-Fi connection is crucial for the proper functioning of your Piper home security camera. By following these steps, you can easily change your Wi-Fi network and ensure continuous surveillance and protection for your home.
Resetting the Piper Home Security Camera
If you need to change the Wi-Fi network connected to your Piper Home Security Camera, you will need to reset the camera to its factory settings. Resetting the camera will remove all previous Wi-Fi network configurations, so you will need to set up the camera again as if it were brand new.
Step 1: Locate the reset button
The reset button is usually located on the back or bottom of the Piper Home Security Camera. It is a small, recessed button that may require a paperclip or similar tool to press.
Step 2: Press and hold the reset button
Using a paperclip or similar tool, press and hold the reset button for about 10 seconds. You may need to use some force to fully depress the button.
Important: While resetting, the camera’s LED lights will flash rapidly, indicating that the reset process is in progress.
Step 3: Set up the camera again
After the camera has been reset, you will need to set it up again as if it were new. This typically involves connecting the camera to your Wi-Fi network and configuring any desired settings through the Piper mobile app or web interface.
Tip: Make sure you have the necessary Wi-Fi network credentials handy before starting the setup process.
By following these steps, you can successfully reset the Piper Home Security Camera to change the Wi-Fi network it is connected to. Keep in mind that after resetting, you will need to go through the setup process again to reconnect the camera to your Wi-Fi network and configure any desired settings.
Performing a Hard Reset
If you need to change the Wi-Fi network on your Piper home security camera, you’ll first need to perform a hard reset. This will reset the camera’s settings back to the factory defaults, allowing you to set up a new Wi-Fi network connection.
Step 1: Locate the reset button
On the back of the Piper camera, you’ll find a small reset button. It is usually located near the power or Ethernet port. Use a paperclip or a similar pointed object to press and hold the reset button for about 10 seconds.
Step 2: Reset the camera
While holding the reset button, you’ll see the camera’s LED light indicator start to blink rapidly. This indicates that the hard reset process has started. Keep holding the reset button until the LED light turns off, then release the button.
Step 3: Reconfigure the camera
After the hard reset, your Piper camera will be restored to its factory settings. You can now set up the camera to connect to a new Wi-Fi network. Follow the instructions provided by Piper’s mobile app or web interface to complete the setup process.
Important Notes:
– Performing a hard reset will delete all previously saved settings and recorded videos on your Piper camera.
– Make sure to have your new Wi-Fi network details ready before starting the setup process.
By performing a hard reset on your Piper home security camera, you can easily change the Wi-Fi network and continue using the camera to monitor your home or office.
Resetting the Camera Settings
If you need to change the Wi-Fi network on your Piper home security camera, you will need to reset the camera settings. This will clear out the existing network information and allow you to connect the camera to a new network.
Please note: Resetting the camera settings will also remove any custom settings or configurations you may have set up, so be sure to make a note of any important settings before proceeding.
To reset the camera settings, follow these steps:
- Locate the reset button on the back of the camera. It is usually a small pinhole button that requires a paperclip or similar tool to press.
- Using a paperclip or tool, firmly press and hold the reset button for about 10 seconds.
- You will see the camera’s LED lights start to flash, indicating that the reset process has begun.
- Continue to hold the reset button until the LED lights stop flashing and remain solid.
- Once the LED lights have stopped flashing, release the reset button. The camera settings have now been reset.
After resetting the camera settings, you can proceed with setting up the camera on your new Wi-Fi network. Refer to the camera’s user manual or the manufacturer’s website for instructions on how to connect the camera to a new network.
Remember to keep your new Wi-Fi network’s SSID and password handy for the setup process.
Connecting the Camera to a WiFi Network
Changing the WiFi network on your Piper home security camera is a simple process that can be done in a few steps. Follow the guide below to connect your camera to a new WiFi network.
Step 1: Power on the camera by plugging it into a power source and ensuring that the LED light is blinking.
Step 2: Download and open the Piper app on your smartphone or tablet.
Step 3: Tap on the camera icon to access the camera settings.
Step 4: Navigate to the “Settings” or “Network” section within the app.
Step 5: Look for the option to change the WiFi network and select it.
Step 6: Choose the new WiFi network from the available networks list.
Step 7: Enter the password for your new WiFi network when prompted and tap “Connect”.
Step 8: Wait for the camera to connect to the new WiFi network.
Step 9: Once connected, the LED light on the camera should stop blinking and stay solid.
Step 10: Test the connection by accessing the live video feed from the camera on your smartphone or tablet.
Note: If you encounter any issues during the connection process, make sure you are within range of the WiFi network and that the network is functioning properly.
Finding the WiFi Connection Settings
When changing the WiFi on your Piper home security camera, you will need to locate the WiFi connection settings. Follow these steps to find them:
- Locate the camera’s main control panel.
- On the control panel, navigate to the settings menu.
- Within the settings menu, look for the “Network” or “WiFi” option.
- Select the “Network” or “WiFi” option to access the WiFi connection settings.
- In the WiFi connection settings, you will find options to view and modify the current WiFi network.
- Look for the “Network Name” or “SSID” field. This is where you can see the name of your current WiFi network.
- If you want to change the WiFi network, select the “Network Name” or “SSID” field and enter the new WiFi network name.
- Save the changes by selecting the “Save” or “Apply” button, if prompted.
Once you have successfully changed the WiFi network on your Piper home security camera, you will need to reconnect the camera to the new network using the provided setup instructions. Make sure to enter the correct WiFi network password during the reconnection process to ensure a successful connection.
Accessing the Camera’s WiFi Menu
To change the WiFi settings on your Piper home security camera, you need to access the camera’s WiFi menu. The WiFi menu allows you to connect your camera to a different WiFi network or update the password for the current network.
Step 1: Launch the Piper App
Start by launching the Piper app on your smartphone or tablet. Make sure that you have a stable internet connection and that your camera is powered on.
Step 2: Select the Camera
In the Piper app, navigate to the camera you want to change the WiFi settings for. Tap on the camera’s tile or icon to select it.
Step 3: Open the Camera Settings
Once you have selected the camera, locate and tap on the “Settings” option. This option is usually represented by a gear or cog icon and is typically found in the top right or bottom right corner of the screen.
Step 4: Access the WiFi Menu
In the camera settings menu, look for the “WiFi” or “Network” option. Tap on it to access the camera’s WiFi menu.
Note: The location of the WiFi option may vary depending on the app version and device you are using. If you can’t find it, refer to the app’s user manual or contact Piper’s customer support for assistance.
Step 5: Select “Change WiFi Network”
Once you are in the camera’s WiFi menu, look for the option to change the WiFi network. This option might be labeled as “Change WiFi Network” or something similar. Tap on it to proceed.
Step 6: Choose a WiFi Network
The camera will present you with a list of available WiFi networks in your area. Scroll through the list to find the network you want to connect to. Tap on the network to select it.
Step 7: Enter WiFi Password (if necessary)
If the selected WiFi network is secured, you may be prompted to enter the password. Tap on the input field, and a keyboard should appear on your screen. Type in the WiFi password carefully.
Note: Make sure to enter the correct password to avoid connectivity issues or unauthorized access to your camera.
Step 8: Save the Changes
After entering the WiFi password (if required), tap on the “Save” or “Connect” button to save the changes and connect your camera to the new WiFi network.
And that’s it! You have successfully accessed the camera’s WiFi menu and changed the WiFi settings on your Piper home security camera. Your camera should now be connected to the new WiFi network, allowing you to monitor your home or office remotely.
Selecting a New WiFi Network
If you want to change the WiFi network that your Piper home security camera is connected to, follow these steps:
1. Access Piper Control Panel
To begin, you will need to access the Piper Control Panel on your mobile device or computer.
If you are using the Piper mobile app, launch the app and log in to your account. If you are using a computer, open a web browser and navigate to the Piper website. Log in to your account using your credentials.
2. Navigate to the Camera Settings
Once you are in the Piper Control Panel, navigate to the Camera Settings section. This section allows you to manage various settings related to your Piper home security camera.
Look for the “WiFi Network” option and click or tap on it to access the WiFi settings.
3. Select a New WiFi Network
In the WiFi settings section, you will see a list of available WiFi networks. Choose the network that you want to connect your Piper camera to.
If the network you want to connect to is not listed, make sure that the network is within range and that you have the correct credentials to connect to it.
Note: Some networks may require additional authentication or may not be compatible with the Piper camera. If you encounter any issues, refer to the network’s documentation or contact your internet service provider for assistance.
4. Enter WiFi Network Details
Once you have selected the new WiFi network, you will need to enter the network’s details, such as the password or any other required information.
Make sure to double-check the information you enter to ensure accuracy.
5. Save and Confirm
After entering the WiFi network details, save the settings and confirm the changes. The Piper camera will attempt to connect to the new WiFi network.
Wait for a few moments until the camera successfully connects to the new network.
By following these steps, you can easily select a new WiFi network for your Piper home security camera. Ensure that the new network is stable and secure to ensure the proper functioning of your camera.
Changing the WiFi Network on the Camera
If you need to change the WiFi network that your Piper home security camera is connected to, follow the steps below:
Step 1: Prepare your camera
- Make sure your camera is powered on and connected to a power source.
- Locate the reset button on the back of the camera.
Step 2: Reset the camera
- Press and hold the reset button for about 15 seconds until you see the camera’s LED light flashing rapidly.
- Release the reset button and wait for the camera to reboot.
Step 3: Connect to the new WiFi network
- Using a computer or smartphone, connect to the WiFi network that you want your camera to be connected to.
- Launch a web browser and enter the IP address of the camera in the address bar. (The default IP address is usually 192.168.0.1 or 192.168.1.1, but you can check the camera’s user manual for the correct IP address.)
- Enter the camera’s username and password to log in. (The default username is usually “admin” and the default password is usually “password”.)
- Navigate to the WiFi settings page and select the option to scan for available WiFi networks.
- Select your new WiFi network from the list of available networks.
- Enter the password for your new WiFi network and click “Save”.
After completing these steps, your Piper home security camera should be successfully connected to the new WiFi network. You can now access the camera’s live feed and manage its settings from your computer or smartphone using the new WiFi network. Make sure to test the connection and ensure that the camera is functioning properly.
Disconnecting from the Current Network
If you need to change the WiFi network on your Piper home security camera, you will first need to disconnect it from the current network. Follow the steps below to disconnect your camera:
- Launch the Piper mobile app on your smartphone or tablet.
- Tap on the camera icon to access the camera settings.
- Select the “WiFi Settings” option from the menu.
- On the “WiFi Settings” page, tap on the “Disconnect” button.
- A confirmation prompt will appear asking if you want to disconnect from the current network. Tap “Yes” to proceed.
- Once disconnected, the camera will no longer be connected to the current WiFi network.
After disconnecting from the current network, you can proceed with connecting your Piper home security camera to a new WiFi network. Make sure to refer to the camera’s user manual or the manufacturer’s website for instructions on how to connect to a new network.
Entering the New WiFi Network details
Once you are ready to change the WiFi network on your Piper home security camera, follow these steps:
Step 1: Open the Piper mobile app on your device and log in to your account.
Step 2: Tap on the camera icon to access the camera settings.
Step 3: Select the “Settings” option from the menu.
Step 4: In the settings menu, choose the “Network” option.
Step 5: Tap on the “Change WiFi Network” button.
Step 6: A list of available WiFi networks will appear. Select your new WiFi network from the list.
Step 7: Enter the password for the new WiFi network.
Step 8: Tap on the “Connect” button to establish the connection to the new WiFi network.
Step 9: Wait for the camera to connect to the new WiFi network. This may take a few moments.
Step 10: Once the connection is established, you will receive a confirmation message. Your Piper home security camera is now connected to the new WiFi network.
Note: Make sure the new WiFi network has a stable connection and sufficient range for the camera to function properly.
FAQ,
Can I change the wifi network on my Piper home security camera using a computer?
No, you cannot change the wifi network on your Piper home security camera using a computer. The wifi network settings can only be changed through the Piper app on your smartphone or tablet. Make sure you have the Piper app installed and follow the steps mentioned earlier to change the wifi network on your Piper camera.
