John Holguin
Feit flood light security cameras are a great addition to your home security system, providing both lighting and surveillance in one device. Installing a Feit flood light security camera is a straightforward process that can be done by anyone with basic DIY skills. In this article, we will guide you through the steps to help you install your Feit flood light security camera and enhance the security of your home.
Step 1: Choose the installation location
Before installing your Feit flood light security camera, carefully choose the best location for it. Consider areas where it can provide optimal coverage and ensure that the camera is within range of your Wi-Fi network. Additionally, make sure the installation location has a sturdy surface where the flood light security camera can be securely mounted.
Step 2: Prepare the necessary tools
Gather the necessary tools for the installation process. You will need a ladder or step stool, a power drill, drill bits suitable for the mounting surface, a screwdriver, and possibly a wire stripper. Make sure you have all the tools readily available before you begin the installation to avoid delays.
Step 3: Mount the camera
Attach the mounting bracket to the chosen location using the provided screws and a power drill. Ensure that the bracket is tightly secured to the surface. Next, gently connect the wiring from the camera to the bracket, taking care not to damage any wires. Once the camera is securely mounted, adjust its angle as desired to get the best view of the monitored area.
Step 4: Connect to Wi-Fi and set up the device
Follow the manufacturer’s instructions to connect your Feit flood light security camera to your Wi-Fi network. This typically involves downloading and installing a mobile app, creating an account, and following the on-screen instructions to complete the setup process. Once connected, you can customize the camera’s settings, such as motion detection sensitivity and notification preferences, to suit your needs.
Step 5: Test and adjust
After completing the installation and setup, it is important to test the functionality of your Feit flood light security camera. Verify that the camera is capturing clear video and that the flood light is functioning properly. Take the time to adjust the camera’s position if necessary for optimal performance.
With these simple steps, you can easily install a Feit flood light security camera and enhance the security of your home. Remember to carefully read and follow the manufacturer’s instructions for the specific model you have purchased to ensure a successful installation. Enjoy the peace of mind that comes with having a reliable and effective surveillance system in place.
Step-by-step guide on how to install Feit flood light security camera
Installing a Feit flood light security camera can help enhance the security of your home or business premises. Follow these steps to install the camera and ensure effective surveillance:
| Step 1: | Choose the installation location: Select a suitable location for the flood light security camera that provides a clear view of the area you want to monitor. Ensure that it is mounted high enough to capture a wide-angle view. |
| Step 2: | Turn off the power: Before you begin the installation, turn off the power to the existing flood light. This is crucial for safety reasons. |
| Step 3: | Remove the existing flood light: Unscrew and remove the existing flood light fixture from the mounting bracket. Disconnect the wiring and set aside the old fixture. |
| Step 4: | Mount the Feit flood light security camera: Attach the Feit flood light security camera to the mounting bracket using the provided screws. Make sure it is securely fastened. |
| Step 5: | Connect the wiring: Connect the wires from the Feit flood light security camera to the electrical wiring in the junction box. Use wire nuts to secure the connections and ensure proper insulation. |
| Step 6: | Adjust the camera position: Adjust the camera position to achieve the desired viewing angle. Ensure that it provides clear visibility of the area you want to monitor. |
| Step 7: | Test the camera: Once the installation is complete, turn on the power and test the Feit flood light security camera. Check if the camera is functioning properly and if the footage is clear. |
| Step 8: | Configure the camera settings: Follow the manufacturer’s instructions to configure the camera settings, such as Wi-Fi connectivity, motion detection sensitivity, and recording options. |
| Step 9: | Monitor the camera: Install the necessary surveillance software or app on your device to monitor the Feit flood light security camera remotely. Set up notifications and alerts for any suspicious activity. |
| Step 10: | Maintain and troubleshoot: Regularly clean the camera lens and ensure that it is free from any obstructions. If you encounter any issues, refer to the instruction manual or contact Feit customer support for assistance. |
By following these step-by-step instructions, you can successfully install and set up your Feit flood light security camera, providing an additional layer of protection and peace of mind.
Choosing the Perfect Location
When installing your Feit flood light security camera, choosing the perfect location is key to ensuring optimal performance and functionality. Here are some key factors to consider when selecting the position for your security camera:
1. Coverage Area
Determine the area you want to monitor and make sure the chosen location provides adequate coverage. Consider the camera’s field of view and ensure it can capture the desired area effectively.
2. Height and Angle
The height and angle of the camera can impact its effectiveness. Mount the camera at a height that provides a clear view of the area without any obstructions. Ensure that it is angled correctly to capture the desired field of view.
3. Power Source
Ensure that the chosen location has easy access to a power source. The Feit flood light security camera requires power to function, so it is essential to have a power outlet nearby or consider alternative power options if necessary.
4. Wi-Fi Signal Strength
Check the Wi-Fi signal strength in the chosen location. The camera relies on a stable Wi-Fi connection to transmit footage and receive notifications. Ensure that the chosen location has a strong and stable Wi-Fi signal for optimal performance.
5. Weather Resistance
Consider the weather conditions in the area where you plan to install the camera. Ensure that the chosen location provides adequate protection against rain, dust, extreme temperatures, and other elements that could potentially damage the camera.
- Ensure the camera is installed in a weather-resistant housing if it does not come with one.
- Consider installing the camera under eaves or other sheltered areas for added protection.
By considering these factors, you can choose the perfect location for your Feit flood light security camera, ensuring optimal functionality, coverage, and protection.
Preparing the necessary tools
Before you start installing your Feit flood light security camera, it is important to gather all the necessary tools and equipment. This will help ensure a smooth and efficient installation process. Here are the tools you will need:
- Screwdriver set (flathead and Phillips head)
- Drill and drill bits
- Tape measure
- Level
- Wire stripper
- Wire connectors
- Electrical tape
- Ladder or step stool
- Step ladder or extension ladder (depending on the installation height)
It is important to have these tools on hand before you begin the installation process as they will be necessary for properly installing and securing the Feit flood light security camera. Also, make sure to wear appropriate safety gear, such as gloves and goggles, to protect yourself during the installation.
Checking the compatibility
Before installing the Feit flood light security camera, it’s important to check the compatibility with your existing setup. Here are the key factors to consider:
Wi-Fi Network
Ensure that you have a stable Wi-Fi network with sufficient bandwidth in the area where you plan to install the flood light security camera. The camera requires a 2.4GHz Wi-Fi connection, and a minimum upload speed of 2Mbps is recommended for optimal performance.
Power Source
The Feit flood light security camera requires a power source to function. It is designed to be hardwired to an electrical junction box or wired to an existing flood light power supply. Make sure you have access to a suitable power source near the installation location.
Supported Devices
Check if the Feit flood light security camera is compatible with your desired device for monitoring, such as a smartphone, tablet, or computer. The camera supports both iOS and Android devices, and the Feit Electric app is available for download on the respective app stores.
System Requirements
Verify that your device meets the minimum system requirements recommended by Feit Electric for accessing the camera’s live feed and recorded footage. These requirements usually include a specific operating system version and minimum hardware specifications.
Table: Compatibility Checklist
| Compatibility Factor | Requirement |
|---|---|
| Wi-Fi Network | Stable 2.4GHz Wi-Fi connection with 2Mbps upload speed |
| Power Source | Access to an electrical junction box or existing flood light power supply |
| Supported Devices | iOS or Android device with Feit Electric app |
| System Requirements | Meets Feit Electric’s recommended specifications |
By confirming the compatibility of your network, power source, and devices, you can ensure a smooth installation process for your Feit flood light security camera.
Mounting the flood light
Before mounting the flood light, make sure you choose a suitable location for the camera. It should have a clear view of the area you want to monitor and provide optimal coverage. Follow these steps to mount the flood light:
Step 1: Gather the necessary tools such as a ladder, a drill, screws, and a screwdriver.
Step 2: Use the ladder to reach the desired mounting location. Make sure the surface is stable and can support the weight of the flood light.
Step 3: Hold the flood light against the mounting surface, aligning it with the desired position. Use a pencil to mark the screw holes.
Step 4: Carefully drill pilot holes at the marked points. This will ensure easier installation and prevent any damage to the mounting surface.
Step 5: Align the flood light with the pilot holes and insert screws through the mounting plate. Use a screwdriver to tighten the screws, securing the flood light in place.
Step 6: Adjust the tilt and angle of the flood light to achieve the desired coverage area. Most flood lights come with adjustable brackets or joints that allow you to easily change the position.
Step 7: Once the flood light is securely mounted, connect the necessary wiring according to the manufacturer’s instructions. Make sure to turn off the power supply before working with the electrical connections.
Step 8: Test the flood light to ensure it is functioning properly before finalizing the installation. Check the camera feed and adjust any settings if needed.
By following these steps, you can successfully mount your feit flood light security camera and enhance the security of your property.
Connecting the camera
To connect the Feit flood light security camera, follow these steps:
- Locate the power supply cable for the camera and plug it into an electrical outlet.
- Ensure that your Wi-Fi network is active and working properly.
- Download the Feit Electric app from the App Store or Google Play Store on your smartphone or tablet.
- Open the app and create a new account if you don’t already have one.
- Follow the app’s on-screen instructions to connect the camera to your Wi-Fi network.
- Make sure the camera is within range of your Wi-Fi router to ensure a stable connection.
- Once the camera is connected to your Wi-Fi network, you will be able to access the live video feed and control the camera through the Feit Electric app.
It is important to note that the specific steps for connecting the camera may vary depending on the model and firmware version. Refer to the camera’s user manual or the manufacturer’s website for detailed instructions tailored to your specific device.
Setting up Wi-Fi connection
To utilize the full functionality of your Feit flood light security camera, you need to establish a stable Wi-Fi connection. Follow the steps below to set up the Wi-Fi connection for your device:
Step 1: Prepare for setup
Before starting the setup process, ensure that you have the following:
- A smartphone or tablet with the Feit app installed
- A stable internet connection
- The Wi-Fi network name (SSID) and password
Step 2: Connect the camera
Now, let’s connect the camera to your Wi-Fi network:
- Open the Feit app on your smartphone or tablet
- Select the camera you want to set up
- Tap on the “Settings” icon on the camera’s control page
- Choose “Wi-Fi settings” from the menu
- Press the “Connect to Wi-Fi” button
- Follow the on-screen instructions to select your Wi-Fi network
- Enter the Wi-Fi password and tap “Next”
- Wait for the camera to connect to the Wi-Fi network
Step 3: Confirm the connection
Once the camera is connected to the Wi-Fi network, you need to confirm the connection:
| LED Indicator | Status | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steady blue | The camera is successfully connected to Wi-Fi | ||||||||||||||||||||||||||||||||||||
| Blinking blue | The camera is connecting to Wi-FiConfiguring the camera settings
Once you have successfully installed the Feit flood light security camera, it is important to configure the camera settings to ensure optimal performance and functionality. Follow these steps to configure the camera settings:
It is recommended to test the camera settings after configuration to ensure that everything is working properly. You can use the live view feature in the app to view the camera feed and verify the settings. By configuring the camera settings, you can customize the camera to meet your specific needs and enhance the security of your property. Remember to keep your Feit flood light security camera firmware up to date to access the latest features and improvements. Testing the cameraOnce you have successfully installed the Feit floodlight security camera, it’s time to test it and ensure that it is functioning properly. Follow these steps to test the camera:
By following these steps and testing the camera thoroughly, you can ensure that it is working as expected and providing you with the necessary security features. Securing the cameraOnce you have successfully installed the Feit flood light security camera, it is important to properly secure it to ensure optimal performance and protect against any unwanted tampering or theft. Here are some steps to help you secure your camera: 1. Position the camera strategically: Place the camera in a position that captures a wide field of view and covers the areas you want to monitor. Ensure that it is mounted securely on a stable surface such as a wall or the eaves of your house. 2. Adjust the camera settings: Use the camera’s mobile app or web interface to adjust the settings according to your preferences. This may include adjusting the motion detection sensitivity, setting up scheduled recording, or enabling push notifications for any detected activity. 3. Set up secure access: Change the default login credentials for the camera’s admin account to prevent unauthorized access. Create a strong password that includes a combination of letters, numbers, and special characters. 4. Enable encryption: Check if your camera supports encryption protocols such as WPA2 or SSL/TLS. Enable these protocols to protect the transmission of video footage between the camera and your smartphone or computer. 5. Regularly update firmware: Keep your camera’s firmware up to date by checking for updates regularly. Manufacturers often release firmware updates to address security vulnerabilities, add new features, and improve overall performance. 6. Monitor camera activity: Set up alerts to notify you of any suspicious activity or unauthorized access attempts. Regularly check the camera’s recorded footage to ensure everything is functioning correctly and there are no signs of tampering. By following these steps, you can enhance the security of your Feit flood light security camera and have peace of mind knowing that you can monitor your property effectively. Maintaining the cameraProper maintenance of your Feit flood light security camera is essential to ensure its optimal performance and longevity. Here are some tips to help you maintain your camera:
By following these maintenance tips, you can ensure that your Feit flood light security camera operates efficiently and provides reliable security surveillance for your property. FAQ,What is a feit flood light security camera?A feit flood light security camera is a security device that combines a flood light and a security camera in one unit. It is designed to provide both outdoor lighting and surveillance capabilities. Can I install a feit flood light security camera myself or do I need professional help?While it is possible to install a feit flood light security camera yourself, it can be more complex than a simple light fixture installation. If you have experience with electrical work and feel confident in your abilities, you may be able to install it yourself following the provided instructions. However, if you are unsure or uncomfortable with electrical work, it is recommended to hire a professional electrician or security system installer to ensure the installation is done safely and correctly. 
Best neighborhood security cameras
$59.99
Best locations for outdoor security cameras
$50.99
How to look at security cameras in among us
$74.99
How to view walmart security cameras
$59.99
 |
