John Holguin
The back camera glass on an iPhone 7 Plus is a delicate component that can easily become cracked or damaged. If you’ve found yourself in this unfortunate situation, not to worry – replacing the back camera glass is a straightforward process that can be done at home with some basic tools and a little patience.
Before you begin, there are a few things you’ll need:
1. A replacement back camera glass. You can purchase one online or from a local electronics store.
2. A small Phillips screwdriver.
3. Tweezers or a spudger tool.
4. A hairdryer or heat gun.
It’s important to note that this guide is intended for informational purposes only. If you’re uncomfortable performing the repair yourself, it’s always best to seek professional assistance.
Once you have all the necessary tools, you can begin the process of changing the back camera glass on your iPhone 7 Plus. Follow the steps below to get started.
Preparing tools for disassembling
Before you start disassembling the back camera glass on your iPhone 7 Plus, it is important to gather all the necessary tools. Having the right tools will make the disassembling process easier and more efficient.
Here is a list of tools you will need:
- Small Phillips screwdriver
- Plastic opening tool
- Tweezers
- Small suction cup
- Heat gun or hairdryer
- Microfiber cloth
- Adhesive strips or double-sided tape
The small Phillips screwdriver is used to remove the screws holding the back camera glass in place. The plastic opening tool is needed to pry the back camera glass off the device without causing any damage. Tweezers are useful for handling small and delicate components during the disassembling process. The small suction cup is used to lift the back camera glass away from the device. The heat gun or hairdryer is used to soften the adhesive holding the back camera glass in place. The microfiber cloth is essential for cleaning the surface of the device and removing any dust or debris. Lastly, adhesive strips or double-sided tape are needed to secure the new back camera glass onto the device.
Make sure to have all these tools ready before starting the disassembling process. This will help ensure a smooth and successful repair.
Removing the back cover of iPhone 7 Plus
To change the back camera glass on your iPhone 7 Plus, you’ll first need to remove the back cover. Here are the steps to do it:
Step 1: Power off your iPhone 7 Plus and lay it facedown on a soft surface.
Step 2: Use a pentalobe screwdriver to remove the two screws located at the bottom of the device next to the charging port.
Step 3: Place a suction cup near the Home button, and gently pull the suction cup to lift the display assembly slightly.
Step 4: Insert a plastic opening tool into the gap between the display assembly and the rear case.
Step 5: Carefully slide the plastic opening tool along the bottom edge, breaking up the adhesive holding the display assembly in place.
Step 6: Repeat the previous step on the other side of the device to completely separate the adhesive.
Step 7: Lift the display assembly up from the side opposite the Home button, and hold it at a 90-degree angle.
Step 8: Use a spudger to disconnect the three cables connecting the display assembly to the logic board.
Step 9: Once the display assembly is disconnected, remove the five screws securing the metal bracket covering the battery connector.
Step 10: Use a spudger to disconnect the battery connector.
Step 11: With all the connectors disconnected, you can now carefully lift the display assembly off the iPhone 7 Plus.
Note: Be gentle and take your time during this process to avoid damaging any components.
By following these steps, you’ll be able to remove the back cover of your iPhone 7 Plus and proceed with changing the back camera glass.
Disconnecting the rear camera module
To begin with, turn off your iPhone 7 Plus and remove all the screws on the bottom of the device using a pentalobe screwdriver.
Use a suction cup to lift the display assembly and gently pry it open with a spudger tool.
Be careful not to damage the cables connecting the display to the logic board.
Locate the rear camera module on the logic board. It is a small square component with a lens.
Disconnect the cables attached to the rear camera module by carefully prying them off with the spudger tool.
Pay attention to the position and orientation of the cables, as you will need to reconnect them later.
Once the cables are disconnected, you can remove the rear camera module from the logic board.
Be gentle and make sure not to apply too much force, as you could damage the delicate components.
Set the rear camera module aside in a safe place, away from any potential damage or static electricity.
Removing the broken camera glass
Before you begin, make sure to turn off your iPhone and disconnect it from any power source. You should also remove any cases or covers that may be on your device.
1. Start by placing a suction cup on the broken camera glass. Press down firmly to create a tight seal.
2. Slowly pull up on the suction cup while applying a steady amount of pressure. This will lift the broken glass away from the iPhone body.
3. Once the glass is lifted, you can use a plastic opening tool or a spudger to gently pry it off the device. Be careful not to scratch or damage the surrounding area.
Be cautious:
– Take your time and be gentle when removing the broken glass to avoid causing further damage to your iPhone.
– If the glass does not come off easily, you can use a hairdryer to apply heat to the adhesive. This will soften it and make it easier to remove the glass.
After successfully removing the broken camera glass, you can proceed with replacing it. Follow the steps in the guide on how to install the new camera glass onto your iPhone 7 Plus.
Installing the new camera glass
Follow these steps to install the new camera glass on your iPhone 7 Plus:
- Make sure your device is turned off before proceeding with the installation.
- Use a small Phillips screwdriver to remove the two screws located near the camera lens.
- Gently lift the old camera glass out of its slot using a pry tool. Be careful not to damage any other components during this process.
- Clean the area around the camera lens to remove any dirt or debris.
- Peel off the adhesive backing from the new camera glass.
- Carefully align the new camera glass in its slot, making sure it sits flush with the surrounding surface.
- Apply gentle pressure to the camera glass, ensuring it is securely in place.
- Reinstall the two screws near the camera lens using the Phillips screwdriver.
- Turn on your iPhone 7 Plus to verify that the new camera glass is functioning properly.
It is recommended to watch a video tutorial or seek professional assistance if you are not confident in your ability to perform this installation yourself.
Reconnecting the rear camera module
After removing the damaged camera glass, you will need to reconnect the rear camera module to ensure it is working properly. Follow the steps below to complete this process:
Step 1: Inspect the rear camera module
Before reconnecting the rear camera module, carefully inspect it for any damage or debris. Clean the module with a soft cloth or compressed air if needed.
Step 2: Align the pins
Align the pins on the rear camera module with the corresponding slots on the iPhone 7 Plus. Make sure they are aligned correctly to avoid any connectivity issues.
Step 3: Gently insert the module
Gently insert the rear camera module into its designated slot on the iPhone 7 Plus, ensuring that the pins are fully inserted and connected.
Step 4: Test the camera
Once the rear camera module is reconnected, test the camera by launching the camera app and taking pictures or recording videos. Make sure the autofocus and other camera features are working properly.
Step 5: Reassemble the device
After confirming that the rear camera module is functioning correctly, you can proceed to reassemble the iPhone 7 Plus by following the steps in the previous sections.
By correctly reconnecting the rear camera module, you will ensure that the camera functions properly and provides high-quality images and videos. Remember to handle the camera module with care to prevent any further damage or connectivity issues.
Attaching the back cover of iPhone 7 Plus
Once you have successfully replaced the camera glass on your iPhone 7 Plus, it’s time to reattach the back cover. Follow these steps to ensure a secure and proper fit:
- Carefully position the back cover over the phone, aligning the edges and corners.
- Starting from one end, gently press down on the cover, applying even pressure to avoid any cracks or damage.
- Work your way around the edges of the phone, pressing down firmly but gently to ensure that the cover is fully secured.
- Check for any gaps or unevenness in the cover. If you notice any, adjust the positioning and press down again until it fits snugly.
- Finally, use your fingertips to give the back cover a gentle press all over to make sure it is firmly in place.
Once the back cover is securely attached, you can power on your iPhone 7 Plus and test the camera to ensure it is functioning properly. If everything looks and works as expected, you have successfully changed the camera glass and reattached the back cover of your iPhone 7 Plus.
Question-answer:
Is it possible to change the back camera glass of iPhone 7 Plus?
Yes, it is possible to change the back camera glass of iPhone 7 Plus. However, it requires some technical knowledge and tools for the replacement process.
What are the tools required to change the back camera glass of iPhone 7 Plus?
The tools required to change the back camera glass of iPhone 7 Plus include a small Phillips screwdriver, a spudger tool, tweezers, a replacement camera glass, and adhesive.
How can I remove the back camera glass of iPhone 7 Plus?
To remove the back camera glass of iPhone 7 Plus, you need to heat the glass with a heat gun or hairdryer to soften the adhesive. Then, use a spudger tool to carefully pry off the glass. Be gentle to avoid damaging the camera module.
Where can I purchase a replacement back camera glass for iPhone 7 Plus?
You can purchase a replacement back camera glass for iPhone 7 Plus from various online retailers or electronics repair stores. Make sure to buy a high-quality replacement to ensure proper fit and functionality.
Can I replace the back camera glass of iPhone 7 Plus myself, or do I need professional help?
You can replace the back camera glass of iPhone 7 Plus yourself if you have the necessary tools and knowledge. However, it can be a delicate process, so if you are not confident in your skills, it is recommended to seek professional help to avoid any damage to the device.
