John Holguin
The iPhone 8 Plus is known for its high-quality camera, which allows you to capture stunning photos and videos. However, over time, the back camera cover may get scratched or damaged, affecting the overall image quality. In such cases, it becomes necessary to remove and replace the back camera cover.
If you’re not sure how to remove the back camera cover on your iPhone 8 Plus, don’t worry! This guide will walk you through the step-by-step process, helping you restore your camera’s functionality in no time.
Before you begin: Ensure that you have a clean and clutter-free workspace. It’s also a good idea to power off your iPhone and remove any accessories or cases for a better grip and safety.
Step 1: Locate the two screws on either side of the charging port at the bottom of your iPhone 8 Plus. These screws are used to secure the back panel. Using a suitable screwdriver, carefully unscrew and remove them.
Step 2: Once the screws are removed, use a suction cup tool or a strong adhesive tape to lift the back panel of your iPhone 8 Plus. Start by placing the suction cup or adhesive tape near the bottom edge of the back panel.
Step 3: Gently pull up on the suction cup or adhesive tape, creating a small gap between the back panel and the rest of the device. Take care not to apply too much force as it may damage the phone.
Step 4: Insert a plastic or nylon spudger into the gap you created and carefully slide it along the edges to loosen the back panel. Be cautious not to insert the spudger too far, as it may damage the internal components.
Step 5: Slowly lift the back panel using the suction cup, adhesive tape, or spudger until it separates from the iPhone 8 Plus. Be mindful of any cables or connectors that may still be attached to the back panel.
Step 6: Locate the back camera cover, which is positioned near the top of the back panel. Carefully detach any connectors or adhesive holding the camera cover in place.
Step 7: Once the connectors or adhesive have been detached, you can remove the back camera cover from your iPhone 8 Plus. Take note of its position and orientation to ensure proper reinstallation later.
By following these steps, you can successfully remove the back camera cover on your iPhone 8 Plus and replace it with a new one as needed. Remember to handle all components with care and seek professional assistance if you encounter any difficulties.
Overview of iPhone 8 Plus
The iPhone 8 Plus is a powerful and feature-rich smartphone released by Apple Inc. in September 2017. It is part of the eighth generation of iPhone models and offers several significant improvements over its predecessors.
Design: The iPhone 8 Plus features an all-glass design with a metal frame that not only gives it a premium look but also allows for wireless charging. The device is available in three stylish colors: Silver, Space Gray, and Gold.
Display: The iPhone 8 Plus sports a 5.5-inch Retina HD display with True Tone technology, which automatically adjusts the screen to match the ambient light for a more comfortable viewing experience. The display is also equipped with a fingerprint-resistant oleophobic coating.
Performance: Powered by Apple’s A11 Bionic chip, the iPhone 8 Plus delivers lightning-fast performance and exceptional efficiency. It handles multitasking, gaming, and augmented reality applications with ease, ensuring a smooth and lag-free user experience.
Camera: The iPhone 8 Plus boasts a dual-camera system on the back, consisting of two 12-megapixel sensors–one wide-angle lens and one telephoto lens. This setup enables optical zoom, portrait mode, and improved low-light photography. The 7-megapixel front-facing camera captures stunning selfies and supports FaceTime video calls.
Operating System: The iPhone 8 Plus comes pre-loaded with iOS 11, which introduces a range of new features and enhancements. Users can take advantage of Siri, Apple’s virtual assistant, and benefit from improved security, a redesigned control center, and expanded Apple Pay functionality.
Battery Life: With its built-in rechargeable lithium-ion battery, the iPhone 8 Plus offers impressive battery life. It can last up to 14 hours of talk time, up to 60 hours of audio playback, and up to 13 hours of internet usage on a single charge.
Storage Options: The iPhone 8 Plus is available in two storage capacities–64GB and 256GB. This allows users to store a large number of photos, videos, apps, and files without running out of space.
Conclusion: Overall, the iPhone 8 Plus is a high-performance smartphone with an attractive design, top-notch camera capabilities, and advanced features. Whether you are a photography enthusiast, a gamer, or a power user, this device offers everything you need for a cutting-edge mobile experience.
Preparations
Before starting the process of removing the back camera cover on your iPhone 8 Plus, it is essential to gather some necessary tools and create a suitable working environment to ensure a smooth and successful operation. Follow the steps below to prepare yourself:
- Gather the required tools:
- Small Phillips screwdriver
- Plastic opening tool
- Tweezers
- Suction cup
- Heat gun or hairdryer (optional)
- Find a clean and well-lit workspace to carry out the task.
- Make sure to turn off your iPhone and disconnect it from any power sources.
- If you have a protective case or any accessories attached to your iPhone 8 Plus, remove them to provide easy access to the back camera cover.
- Consider using an anti-static wrist strap to avoid any static electricity discharge that could potentially harm your iPhone’s internal components.
Once you have all the necessary tools and have prepared the working environment, you are ready to proceed with removing the back camera cover on your iPhone 8 Plus.
Gather the necessary tools
Removing the back camera cover on an iPhone 8 Plus requires the use of specific tools to ensure a safe and successful process. You will need the following:
1. Screwdriver:
Start by having a pentalobe screwdriver on hand. This specific screwdriver is necessary for removing the two pentalobe screws located on either side of the Lightning port at the bottom of the iPhone.
2. Suction cup:
A suction cup is also required to remove the back glass cover. This will help lift the cover off the device without causing any damage. Make sure the suction cup has a strong hold before proceeding further.
3. Plastic opening tools:
Plastic opening tools are crucial in prying the back glass cover away from the body of the iPhone. These tools are designed to prevent any scratching or dents on the device during the removal process. It’s recommended to have multiple plastic opening tools of different shapes and sizes for better flexibility.
4. Tweezers:
Tweezers can be useful in handling small screws or delicate parts during the removal process. They provide a better grip and more precision when working with intricate components.
Make sure to have all these essential tools ready before attempting to remove the back camera cover of your iPhone 8 Plus. By using the right tools, you can ensure a safer and more efficient removal process.
Power off the iPhone 8 Plus
Before removing the back camera cover on your iPhone 8 Plus, it’s important to power off the device to avoid any potential damage or injury. Here’s how you can safely turn off your iPhone 8 Plus:
Step 1: Press and hold the Side button
Locate the Side button on the right side of your iPhone 8 Plus. Press and hold this button until the power off slider appears on the screen.
Step 2: Slide to power off
Once the power off slider appears, use your finger to slide it from left to right. This action will initiate the shutdown process.
Note: If you have a passcode set up on your iPhone, you’ll be prompted to enter the passcode before the shutdown process can be completed.
Step 3: Wait for the device to power off
After sliding the power off slider, wait for a few seconds as your iPhone 8 Plus shuts down completely. The screen will turn black, indicating that the device is powered off.
Now that your iPhone 8 Plus is powered off, you can proceed with removing the back camera cover safely and without any risk of damage.
Removing the back camera cover
The back camera cover on an iPhone 8 Plus can be removed with some careful disassembly. Follow the steps below to safely remove the camera cover:
Step 1: Gather the necessary tools
Before you begin, make sure you have the following tools:
- Small Phillips screwdriver
- Plastic pry tool
- Heat gun or hairdryer
- Suction cup tool
Step 2: Power off your iPhone
Before starting the disassembly process, power off your iPhone to avoid any potential damage.
Step 3: Remove the exterior screws
Use a small Phillips screwdriver to remove the two screws located next to the charging port on the bottom of your iPhone.
Step 4: Apply heat to loosen the adhesive
Use a heat gun or hairdryer to apply gentle heat to the back of your iPhone. Be careful not to overheat the device. This will help soften the adhesive securing the back camera cover.
Step 5: Use a suction cup tool to lift the cover
Place a suction cup tool on the back of your iPhone near the bottom edge. Gently apply pressure and lift the suction cup to create a small gap between the back camera cover and the housing.
Step 6: Pry the cover open
Insert a plastic pry tool into the gap you created with the suction cup. Carefully twist the tool to widen the gap and loosen the adhesive further.
Step 7: Remove the back camera cover
Gently lift the back camera cover using the plastic pry tool. Be cautious not to damage the camera or any other components as you remove it.
With the back camera cover removed, you can now proceed with any necessary repairs or cleaning. Remember to reassemble the device carefully and securely after completing your task.
Locate the screws near the camera
Before you can remove the back camera cover on your iPhone 8 Plus, you need to locate the screws near the camera. These screws secure the camera module in place, and you’ll need to remove them in order to access the cover.
Take a close look at the camera module on the back of your iPhone 8 Plus. You’ll notice two small screws on either side of the module. These screws are usually very tiny, so be careful not to lose them during the removal process.
Use a small Phillips or Pentalobe screwdriver, depending on the type of screws your iPhone 8 Plus has. Insert the screwdriver into the screw head and gently turn it counterclockwise to loosen the screws. Be sure not to apply too much force as this may damage the screws or the camera module.
Once you have loosened both screws, carefully lift the camera module from the back cover. Pay close attention to any connectors or cables that may be attached to the module. If there are any, gently disconnect them before completely removing the module.
With the camera module removed, you can now proceed to remove the back camera cover on your iPhone 8 Plus. Remember to keep the screws in a safe place so you don’t lose them. It’s also a good idea to organize the screws to ensure you know exactly where each one goes during reassembly.
Unscrew the screws using a screwdriver
Removing the back camera cover on your iPhone 8 Plus requires unscrewing the small screws that hold it in place. To do this, you will need a screwdriver that is compatible with the screws on your device.
Here is a step-by-step guide on how to unscrew the screws:
- Make sure your iPhone is powered off before starting the disassembly process.
- Take the screwdriver and locate the screws on either side of the back camera cover. There are usually two screws.
- Position the tip of the screwdriver into the head of the first screw and apply firm, steady pressure in a counter-clockwise direction. Be careful not to strip or damage the screws.
- Repeat this process with the second screw.
- Once the screws are loosened, use your fingers or a pair of tweezers to remove them completely.
Remember to keep the screws in a safe place, as you will need them when reassembling your iPhone’s back camera cover.
Now that you have successfully unscrewed the screws, you can proceed with removing the back camera cover and performing any necessary repairs or replacements.
Carefully lift the back camera cover
Removing the back camera cover on your iPhone 8 Plus requires some caution and precision. Follow these steps to safely remove the cover:
- Prepare your workspace: Find a clean and well-lit area where you can comfortably work on your iPhone. Use a soft cloth or mat to protect the back of your device.
- Gather the necessary tools: You will need a special pentalobe screwdriver (0.8mm) and a plastic opening tool. These tools can be found in smartphone repair kits or purchased separately.
- Switch off your iPhone: To avoid any accidental damage or electrostatic discharge, it is recommended to power off your device before proceeding.
- Locate the two pentalobe screws: These screws are located on either side of the Lightning connector at the bottom of your iPhone. Use the pentalobe screwdriver to unscrew them.
- Insert the plastic opening tool: Gently insert the flat end of the plastic opening tool between the back cover and the frame of your iPhone. Be careful not to apply too much force to prevent any damage.
- Slowly lift the back camera cover: Apply even pressure with the plastic opening tool and carefully lift the back camera cover. Take your time and make sure not to pull too hard or at an angle, as this can cause the cover to crack.
- Disconnect the camera connectors: Once the back camera cover is lifted, you will see two connectors attached to the iPhone’s logic board. Use the nylon spudger or plastic opening tool to carefully disconnect these connectors.
- Set aside the back camera cover: Place the lifted back camera cover in a safe location to prevent any damage.
By following these steps with caution, you should be able to successfully remove the back camera cover of your iPhone 8 Plus and proceed with any necessary repairs or maintenance.
Safety precautions
Before you begin removing the back camera cover on your iPhone 8 Plus, it is important to follow these safety precautions:
- Make sure your iPhone is turned off.
- Disconnect any cables or chargers that may be connected to your iPhone.
- Find a clean, well-lit workspace where you can safely work on your iPhone.
- Consider wearing antistatic gloves to protect yourself and prevent any static discharge from damaging your iPhone.
- Use a screwdriver that is appropriate for the screws on your iPhone. Using the wrong tool can damage the screws and make it difficult to remove them.
- Take your time and be gentle when removing the back camera cover. Applying too much force can cause damage to the camera or other components.
- Keep track of all the screws and small components that you remove. It is a good practice to lay them out in the order they were removed or use a magnetic mat to keep them organized.
- If you are uncomfortable with any step of the process, it is recommended to seek professional assistance.
By following these safety precautions, you can minimize the risk of causing any damage to your iPhone while removing the back camera cover.
FAQ
What tools do I need to remove the back camera cover on iPhone 8 Plus?
To remove the back camera cover on iPhone 8 Plus, you will need a small Phillips screwdriver, a plastic pry tool, a suction cup, and a pair of tweezers.
Is it difficult to remove the back camera cover on iPhone 8 Plus?
Removing the back camera cover on iPhone 8 Plus can be a bit tricky, but with the right tools and a gentle hand, it is manageable. Just be sure to follow the steps carefully and take your time to avoid any damage to the device.
Can I remove the back camera cover on iPhone 8 Plus without any tools?
No, you will need some tools to remove the back camera cover on iPhone 8 Plus. The screws holding the cover in place require a small Phillips screwdriver, and you will also need a plastic pry tool, a suction cup, and a pair of tweezers to safely remove the cover without causing any damage.
Are there any risks involved in removing the back camera cover on iPhone 8 Plus?
There are some risks involved in removing the back camera cover on iPhone 8 Plus, especially if you’re not familiar with the process. If you apply too much force or use the wrong tools, you could potentially damage the device. It’s always best to proceed with caution and consider seeking professional help if you’re unsure.
Are there any precautions I should take before removing the back camera cover on iPhone 8 Plus?
Before removing the back camera cover on iPhone 8 Plus, it’s important to power off the device and disconnect the battery to avoid any electrical damage. It’s also a good idea to work in a clean and well-lit area to prevent any small screws from getting lost. Additionally, make sure to keep track of the screws and their placement to ensure they are properly reinstalled.
