John Holguin
Accidents happen, and sometimes our beloved smartphones end up getting wet. If you have accidentally dropped your iPhone 7 Plus in water and now the camera is not functioning properly, don’t panic!
Before you take your phone to a professional or spend money on a new device, try these simple steps to get the water out of the camera on your iPhone 7 Plus.
1. Turn off your iPhone immediately. Water and electronics don’t mix well, and the first step to minimizing any potential damage is to switch off your device as soon as possible.
2. Wipe your iPhone dry. Use a soft cloth or paper towel to gently remove any visible water from the external surfaces of your iPhone. Be careful not to push the water further into the device.
3. Remove any accessories and SIM card. Open the SIM tray and remove the SIM card. If you have any accessories attached to your iPhone, such as a case or headphones, take them off as well.
4. Gently shake your iPhone. Holding your iPhone with the camera facing downwards, give it a few gentle shakes to help remove any excess water that may be trapped inside the camera lens.
5. Use silica gel packets. Place your iPhone along with a few silica gel packets in a sealable plastic bag or container. The silica gel helps to absorb moisture. Leave your iPhone in the bag/container for at least 48 hours to allow it to dry out completely.
6. Try a rice bath. If you don’t have silica gel packets, you can also use uncooked rice to help absorb moisture. Fill a container with rice and bury your iPhone in it, making sure it is completely covered. Leave it there for at least 48 hours.
7. Test the camera. After allowing your iPhone to dry thoroughly, turn it on and check the camera. If the water damage was minimal, your camera should work properly again. However, if the problem persists, it may be necessary to seek professional assistance.
Remember, water damage is not covered under warranty, so it’s essential to act quickly and take the necessary steps to dry out your iPhone as soon as possible. These steps are not guaranteed to work in every case, but they are worth a try before considering more drastic measures.
![2024 New for iPhone 15 Pro Max Case Waterproof,[Built-in Screen Protector & Camera Protector][Full Body Shockproof][IP68 Underwater][Dustproof][Dropproof] Phone Case for iPhone 15 Pro Max 6.7"](https://m.media-amazon.com/images/I/51nJ7Wj+UPL._SS520_.jpg)
If none of the above steps work or if you’re unsure about performing them yourself, it’s best to consult a professional technician who can assess the extent of the damage and suggest appropriate solutions.
Removing Water from Camera iPhone 7 Plus: A Step-by-Step Guide
Accidentally getting water in your iPhone 7 Plus camera can be a stressful situation. However, there are some steps you can take to try and fix the issue before the water causes any permanent damage. Follow this step-by-step guide to remove water from your iPhone 7 Plus camera.
1. Turn off the iPhone and remove any accessories
Immediately turn off your iPhone 7 Plus if it comes into contact with water. The first step is to prevent any further damage by powering it down. Also, remove any accessories such as cases or screen protectors.
2. Dry the outside of the iPhone
Take a soft, lint-free cloth and gently wipe down the exterior of the iPhone to remove any visible water. Be careful not to push the water further into the device. Pay special attention to the camera lens area.
3. Shake the iPhone gently
Gently shake the iPhone 7 Plus to help remove any water that may have entered the camera or other internal parts. This method can be effective in moving small droplets away from critical components.
4. Use a desiccant or uncooked rice
Place your iPhone in a sealed container along with a desiccant packet or uncooked rice. These materials can help absorb moisture from the device. Leave the iPhone in the container for at least 24 hours.
5. Avoid using heat sources
While it may be tempting, do not use a hairdryer, oven, or any other heat source to speed up the drying process. Excessive heat can damage the internal components of the iPhone.
6. Test the camera
After the drying period, turn on your iPhone 7 Plus and test the camera functionality. Check if the water damage has been resolved. If the camera still shows signs of water damage or does not function properly, consider contacting Apple support or a professional repair service.
Remember, these steps may help remove water from your iPhone 7 Plus camera, but there are no guarantees. It’s always best to be cautious and avoid exposing your device to water in the first place.
Assessing the Damage: Is Your Camera Waterlogged?
Accidentally dropping your iPhone 7 Plus into water can be a distressing experience, especially when it comes to the camera. The camera is a crucial feature of the iPhone, and any water damage can significantly impact its functionality.
Signs of Water Damage
It’s important to assess whether your camera is waterlogged to determine the extent of the damage. Here are some common signs of water damage:
- Blurry or hazy photos
- Dark spots or smudges on the camera lens
- Inability to focus
- Camera not functioning at all
Steps to Check for Water Damage
Follow these steps to determine if your iPhone 7 Plus camera has been waterlogged:
- Check the camera lens for any visible signs of water or condensation.
- Take a few test photos and examine them for any abnormalities such as blur or dark spots.
- Try switching between different camera modes and see if any of them are not working properly.
- If you have access to a different iPhone, compare the quality and performance of the cameras to identify any discrepancies.
If you notice any of these signs or suspect that your camera may be waterlogged, it’s essential to take immediate action.
Note: It is always recommended to consult a professional technician or contact Apple Support to get a proper assessment and repair for your device.
Avoiding Common Mistakes: What NOT to Do
When it comes to getting water out of your iPhone 7 Plus camera, there are certain things you should avoid doing to prevent further damage. Here’s a list of common mistakes you should steer clear of:
1. Do Not Turn on Your Device
As tempting as it may be to check if your iPhone is still working, do not turn it on if it has been exposed to water. Water can cause short circuits and turning on your device could potentially make the problem worse.
2. Do Not Shake or Blow on Your Device
Shaking or blowing on your iPhone might seem like a good idea to remove the water, but it can actually drive the water further into the internal components. This can exacerbate the damage and make it more difficult to repair.
3. Do Not Use Heat to Dry Your Device
Using a hairdryer, oven, or any form of heat to dry your iPhone is another mistake to avoid. Exposing your device to heat can cause the water to evaporate quickly, but it can also damage the internal components and potentially melt certain parts.
4. Do Not Press Any Buttons or Rest Your Phone on Hard Surfaces
Pressing buttons or resting your phone on hard surfaces while it is wet can push the water further into the device, potentially causing more damage. Avoid applying any pressure to the phone until it is properly dried.
5. Do Not Wait Too Long to Take Action
Procrastination can be detrimental when dealing with water damage. The longer you wait to address the issue, the higher the chances of irreversible damage. Act quickly and follow the appropriate steps to dry out your iPhone as soon as possible.
By avoiding these common mistakes, you can increase the chances of successfully removing water from your iPhone 7 Plus camera and minimize the risk of additional damage.
Drying Out Your Camera: Gentle Techniques
If your iPhone 7 Plus camera has come into contact with water, it is essential to dry it out properly to prevent any permanent damage. Here are some gentle techniques you can try:
Rice Method
One popular method for drying out a wet camera is using uncooked rice. Simply place your phone in a container filled with rice and leave it there for at least 24-48 hours. The rice will absorb the moisture from the camera, helping to dry it out. However, be cautious not to let any rice grains get into the openings or ports of your phone, as it may cause further damage.
Desiccant Packets
Another effective option is to use desiccant packets. These small packets are commonly found in shoeboxes, electronic products, or even medicine bottles. Place your iPhone 7 Plus camera with the desiccant packets in an airtight bag or container. Leave it for a couple of days, and the desiccant packets will absorb the moisture from the camera.
Remember to remove the SIM card tray and any other removable parts before attempting any of these drying techniques. This will allow for better air circulation and ensure the thorough drying of your camera. It is also crucial to avoid using heat sources like a hairdryer or placing your phone in direct sunlight, as excessive heat can damage the internal components of your camera.
| Gentle Drying Techniques: |
|---|
| – Rice Method |
| – Desiccant Packets |
The Rice Method: Does It Really Work?
When searching for ways to fix a water-damaged iPhone 7 Plus camera, you might come across the rice method. This method involves placing the wet device in a container filled with uncooked rice and leaving it there for a significant amount of time.
But does this method really work? While many people swear by it, the reality is that it’s not a foolproof solution.
While rice can absorb moisture, it’s not a magical solution that will instantly fix your water-damaged iPhone 7 Plus camera. In fact, relying solely on the rice method could actually cause more harm than good.
When your camera comes into contact with water, damage occurs due to corrosion and short circuits. Simply placing it in rice won’t address these issues and may even allow the damage to worsen over time.
Instead of solely relying on the rice method, it’s important to take immediate action if your iPhone 7 Plus camera gets waterlogged. Here’s what you should do:
1. Power off the device: Immediately power off your iPhone to prevent any further damage.
2. Dry the exterior: Gently wipe the exterior of the phone with a soft cloth to remove any excess water.
3. Do not charge the device: Avoid the temptation to plug in your phone, as doing so can cause a short circuit.
4. Remove the SIM card and tray: Take out the SIM card and tray and dry them separately.
5. Air dry the phone: Instead of using rice, place your iPhone in a dry, well-ventilated area. Allow it to air dry for at least 48 hours.
6. Use silica gel: If you have silica gel packets, you can place them near the phone to help absorb moisture.
7. Seek professional help: If the water damage is severe or if the camera still doesn’t work after drying, it’s best to consult a professional technician.
Remember, the rice method might work in some cases, but it’s not a guaranteed fix for water-damaged iPhone 7 Plus cameras. It’s always better to take immediate action and seek professional help if needed.
Using Silica Gel Packets: A Better Alternative?
When it comes to retrieving moisture from your iPhone 7 Plus camera, using silica gel packets can be a more effective and safer solution. Silica gel is a drying agent that is commonly used to keep moisture away from electronic devices.
Here’s how you can use silica gel packets to remove water from your iPhone 7 Plus camera:
- First, act quickly: As soon as you notice water in your camera, power off your device and remove any external accessories.
- Use a vacuum cleaner: Gently use a vacuum cleaner to suction out any water that might be present in the camera area. Be careful not to apply too much pressure and damage the components.
- Get silica gel packets: You can purchase silica gel packets from your local store or online. These small packets contain silica beads that are designed to absorb moisture.
- Place your iPhone in a bag: Place your iPhone 7 Plus in a sealable plastic bag along with several silica gel packets.
- Let it sit: Seal the bag and let your iPhone sit with the silica gel packets for at least 24 hours. This will allow the silica gel to absorb the moisture from your device.
- Take it out: After 24 hours, remove your iPhone from the bag and check if the camera is dry. If there is still moisture present, you can repeat the process with fresh silica gel packets.
Note: It’s important to remember that using silica gel packets is not a guaranteed fix for water damage. While it can help absorb moisture, there may still be underlying damage to the camera components. If you are unsure or if the problem persists, it’s recommended to seek professional assistance.
By following these steps and using silica gel packets, you have a better chance of removing water from your iPhone 7 Plus camera. Remember, the key is to act quickly and be cautious throughout the process.
DIY Moisture Absorbers: Creating Your Own Solution
If your iPhone 7 Plus has been exposed to water and you need to get the water out of its camera, you can try creating your own moisture absorber solution at home. This method can be effective in removing moisture and preventing any further damage to your phone.
Here’s how you can make your own DIY moisture absorber:
1. Rice: One of the most common household items that can absorb moisture is rice. Take a small cloth or a cotton sock and fill it with uncooked rice. Tie the cloth or sock securely, ensuring that the rice is contained within.
2. Silica Gel Packets: You might have come across these small packets when purchasing electronics or other items. They are commonly used to absorb moisture and can be reused. If you have some silica gel packets at home, place them near your iPhone 7 Plus or inside a sealed container with your phone. This will help absorb the moisture.
3. Salt: Salt can also act as a moisture absorber. Fill a small container with table salt and place it near your phone. Salt can help absorb the moisture present in the air and reduce the humidity around your phone.
4. Cat Litter: Cat litter contains moisture-absorbing properties, making it an effective solution. Take a small cloth or a cotton sock and fill it with cat litter. Tie it securely and place it near your phone.
5. Baking Soda: Baking soda is a versatile household item that can also help absorb moisture. Fill a small container with baking soda and place it near your iPhone 7 Plus. The baking soda will work to reduce the humidity around your phone.
6. Rock Salt: Rock salt, also known as de-icing salt, can absorb moisture as well. Fill a small cloth or a cotton sock with rock salt, tie it securely, and place it near your phone.
Remember: When using any of the above DIY moisture absorbers, it’s essential to keep your iPhone 7 Plus turned off and avoid using it until all the moisture has evaporated. Additionally, it’s recommended to place your phone and the moisture absorber in a sealed container to maximize the absorption process.
Disclaimer: These DIY moisture absorbers can help remove moisture from your iPhone 7 Plus, but there is no guarantee that they will completely fix any water-related damage. If you’re concerned about the condition of your phone or if it’s not working properly, it’s recommended to consult a professional technician.
Seeking Professional Help: When to Consult a Technician
If you have tried all the DIY methods to get water out of your iPhone 7 Plus camera and nothing seems to be working, it might be time to seek professional help. While the Internet is full of creative hacks and do-it-yourself solutions, sometimes the damage caused by water is too severe to be fixed at home.
Here are a few signs that indicate it’s time to consult a technician:
- Water damage indicators: If the water damage indicators on your iPhone 7 Plus are triggered, it means that your device has been exposed to water. These small indicators are usually located in the SIM card slot or charging port. When they come in contact with water, they change color, indicating water damage. If you see these indicators have changed color, it’s a clear indication that you need professional help.
- Unresponsive camera: If your camera is not functioning properly or is unresponsive after attempting to dry it out, it is recommended to consult a technician. It could be due to internal damage caused by water, which might require professional expertise to fix.
- Visible water droplets: If you can visibly see water droplets or moisture inside your iPhone 7 Plus camera, it is a sign that water has seeped into the internal components. In such cases, it is best to let a trained professional handle the situation to avoid further damage.
- Persistent issues: If you have tried all the suggested methods to dry out your iPhone 7 Plus camera and the issues still persist, it’s time to reach out to a technician. Continuing to use a water-damaged camera can lead to more severe problems in the long run.
Remember, attempting to fix a water-damaged camera yourself can be risky and may cause further damage to your device. It is always advisable to consult a skilled technician who has experience dealing with water damage in electronic devices.
Prevention is Key: Tips to Keep Your Camera Dry
Water damage can be a nightmare for your iPhone 7 Plus camera, but luckily, there are steps you can take to prevent it. Follow these tips to keep your camera dry and avoid potential costly repairs:
1. Avoid exposing your iPhone 7 Plus to water: One of the simplest ways to keep your camera dry is to minimize its exposure to water. Avoid using your phone near water sources such as pools, lakes, or the bathroom sink.
2. Invest in a waterproof case: If you frequently find yourself in situations where your phone could be exposed to water, consider investing in a waterproof case. These cases are specifically designed to protect your phone from water damage, allowing you to take underwater photos or use your camera near water without worrying.
3. Be cautious in rainy conditions: Rain can pose a threat to your phone’s camera, so be extra cautious when it’s raining. Keep your phone securely stowed in a bag or pocket, and avoid using it in heavy rain. If you do need to use it in wet conditions, consider using an umbrella or a waterproof pouch.
4. Clean your phone regularly: Dust, dirt, and debris can build up around your camera lens, creating a potential entry point for water. Regularly cleaning your phone with a soft, lint-free cloth can help keep your camera area free from these particles and reduce the risk of water damage.
5. Take care near steam and condensation: Steam and condensation can also cause damage to your camera. Make sure to keep your phone away from steamy environments, such as saunas or hot showers, and avoid exposing it to rapid temperature changes. If your phone does become exposed to steam or condensation, allow it to dry thoroughly before using the camera.
6. Avoid DIY liquid damage fixes: If your phone does come into contact with water, avoid attempting DIY fixes such as placing it in rice or using a hairdryer. These methods can potentially cause more harm than good. Instead, turn off your phone immediately, remove the sim card and any other removable parts, and bring it to a professional to assess the damage and suggest the best course of action.
By following these preventative measures, you can help keep your iPhone 7 Plus camera dry and continue capturing those special moments without the worry of water damage.
FAQ
What should I do if water gets into my iPhone 7 Plus camera?
If water gets into your iPhone 7 Plus camera, you should immediately turn off the phone and remove any case or accessories. Then, dry the phone with a soft cloth or towel, making sure to remove any visible water. It is important not to shake the phone, as this can spread the water further inside. Leave the phone in a dry place, preferably with a low humidity environment, for at least 48 hours to allow the water to evaporate. Do not use a hairdryer or any heat source to dry the phone, as this can cause further damage. After 48 hours, you can try turning on the phone to see if it is working properly. If not, it is recommended to take it to an authorized service centre for further assistance.
Can I use rice to remove water from my iPhone 7 Plus camera?
While it is a popular myth that placing a water-damaged iPhone in a bag of rice will absorb the moisture and fix the issue, it is not a reliable or effective solution. Rice is not an effective desiccant and may not completely remove the water from the camera or other internal components. It is best to follow the steps mentioned earlier to dry the iPhone properly. If the issue persists, it is advisable to seek professional help or take the device to an authorized service centre.
How long does it take to dry out an iPhone 7 Plus camera after water damage?
The drying time for an iPhone 7 Plus camera after water damage can vary depending on several factors, such as the amount of water, humidity levels, and the extent of the damage. It is recommended to leave the phone in a dry place for at least 48 hours to allow the water to evaporate. During this time, it is important not to turn on or charge the phone. After 48 hours, you can try turning on the phone to see if it is working properly. If not, it is advisable to seek professional help or take the device to an authorized service centre.
